3 Ways to Fix Case Blinking Red Light on Galaxy Buds/IconX

Whether you have Galaxy Gear IconX or Galaxy Buds, the red light blinking issue is prevalent. This post focuses on Galaxy IconX, but the below methods also work on Galaxy Buds. I encountered this issue on the second day of buying IconX 2018. It took me an hour to find the solution, but you don’t have to waste an hour. The article covers how to fix the LED light flashing issue.

To find out what can cause this issue, I tried to make this blinking issue happen. I found three possible causes and how to fix them.

Table of contents

Why the LED light flashes?

According to the manual, if the red LED flashes, then the charging disables (most probably because of environmental problems). It can be anything, like temperature, water, or dust. But, in most cases, there is one thing which most people do, but they don’t know.

Checking the wingtips to fix the issue

The simple solution for me was that I was applying the wingtips wrong. In my case, I was using the left wingtip on the right earbud and same for the right one. On each wingtip, you’ll find the side printed text. If accidentally, you have placed them wrong then that’s the fix for your issue. Check the below image.

Samsung Gear IconX 2018 LED Flashing Fix



Sticking a paper to apply force

Another way is to put a paper in the case to apply some power to the buds. The charging contacts might not be fully connected, so using a paper will force the device. Check the below image.

Samsung Gear IconX 2018 LED Flashing Fix 2

Putting a piece of paper will help the case force the earbud to touch all the charging dots. With enough push, the earbud will surely charge.

Check out: Top 10 Must-Have Android Apps in 2019

Removing the wingtips completely

Another way I know is removing the wingtips while charging. Because of the wingtips, the charging contacts don’t contact with enough force. Removing wingtips can help them touch the charging contacts.

In conclusion

I hope one of the methods worked. Let me know if one worked. Also, if you have any other way to fix this issue, please let me know.

11 thoughts on “3 Ways to Fix Case Blinking Red Light on Galaxy Buds/IconX”

  1. Thanks for the solution. The earbuds are charging OK now. Don’t know how long it would have taken to fine the solution without the video

  2. Thanks MK, the solution for me at least, was to interchange the wing support that was not align with the safety support. It also fits better with greater confort to my ears also. Great video, great article, thanks again

  3. Hi does anyone have an issue where after fully charging your earbuds the left earbud drains much faster even when its placed in a fully charged charging case.

    After an hour or so the right bud will be at 100% but the left would have drained to say 40%.

    Very frustrating as the left bud eventually drains the charging case in a day or so

    1. That seems like a problem with the bud itself. You can try resetting the bud(s). Hopefully, it’ll fix. Otherwise, there is a battery issue with the bud.

  4. M K, great post, thank you. I didn’t realize that the wingtips are side specific. Swapped and flashing gone.

    it was driving me crazy. Thank you for your help.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.